The use of plinth profiles has not been standard in the construction industry until recently. Today, however, more and more contractors are embracing this solution, finding that it really the bootstrap is needed and facilitates further work. There are two types of this product: aluminium plinth profiles and with PVC with mesh and drip cap. Later in this article, we will take a closer look at this second type of skirting board and describe its appearance, functions and explain why each of its components is necessary and why it serves a purpose.
What is a plinth profile with mesh and drip cap?
Plinth profile (also known as starter trim) is a product made of aluminium or PVC. Its width is adapted to the thickness of the polystyrene or mineral wool board. In the process of insulating buildings, it is laid as the first, bottom layer under the polystyrene or mineral wool, which is an excellent cover for thermal insulation materials. The profile is profiled so that it can be easily attached to a previously levelled, cleaned and dry foundation wall. The insulation layer is laid directly on the profile.
The starter strips come in two types - aluminium and PVC. The latter have a fibreglass mesh and a drip cap attached (using ultrasonic welding). These elements have important functions that determine the use and function of the profile.
What is the glass mesh and drip cap in the starter strip used for?
The drip moulding is a product often chosen by professionals. It is valued by them mainly because of the functions it performs.
The canopy is used to drain rainwater flowing over the façade. The installation location of such mouldings is important, as they are used precisely where the drainage of water from the façade surface is crucial, i.e. under balconies, terraces and around windows. The absence of moisture here ensures that these areas are kept dry.
The fibreglass mesh facilitates the installation of the skirting board and further strengthens its fastening. The mesh is embedded in adhesive, which must be spread on the surface of the insulation layer. This activity is relatively easy to perform, as it is carried out at the same time with the embedding of the so-called system mesh (under-plaster, which supports the Styrofoam panels or mineral wool). Once the adhesive has dried, the plastering process begins. The plaster fills the drip moulding, so that the moulding becomes completely invisible, but still performs its important functions.
Should a plinth profile be used?
Use a plinth profile - Its use and installation are relatively straightforward, especially in relation to the advantages this product gives us. The starter strip is an important reinforcement of the lower insulation layer - the fibreglass mesh further enhances it. The profile also provides an aesthetically pleasing finish to the lower edge of the façade. The drip cap, on the other hand, effectively protects against water leakage. Although there is no requirement to install plinth profiles when insulating the exterior of buildings, it is worth reaching for this product and taking advantage of its many advantages.
Are you looking for plinth profiles with mesh and drip caps of the best quality? Take a look at our offer!
